Huawei WIFI AX2 User Manual

35 How do I connect three or more
HarmonyOS Mesh+ routers to the same
network?
Scenario 1: HarmonyOS Mesh+ Wired Networking(Via Network Cable)
There is no specic limit on the number of secondary routers connected to a main
router. However, it is recommended that the total number of routers does not
exceed six, and the cascading levels does not exceed three. If there are more than
six routers, or more than three cascading levels, the routers may not function
properly.
Step 1
Congure one of the routers as the only main router to access the Internet.
Step 2 Connect the second router to the main router using a network cable.
Step 3 Connect the third, fourth, and other routers to the main router using network
cables. Alternatively, connect the second router to the
rst one using a network
cable, and then connect the rest routers to the second one in wired mode.
----End
NO TE
The number of LAN ports varies according to router models. The maximum number of
secondary routers that can be connected to a main router through network cables is
dierent. The preceding wired networking solution is for reference only.
Scenario 2: By Wi-Fi repeater or wireless HarmonyOS Mesh+ networking
A maximum of ve secondary routers can be connected to a main router through
Wi-Fi relay or HarmonyOS Mesh+ wireless networking.
Step 1
Congure one of your routers as the main router to access the Internet.
Step 2 Connect a second router to the main router using HarmonyOS Mesh+.
Step 3 Connect any additional routers individually to the main router using HarmonyOS
Mesh+.
HUAWEI_WIFI_AX2
HUAWEI_WIFI_AX2
35 How do I connect three or more HarmonyOS
Mesh+ routers to the same network?
Issue 01 (2022-02-18) Copyright © Huawei Technologies Co., Ltd. 130

Huawei WIFI AX2 Specifications

General

DSL WAN	No
Ethernet WAN	Yes
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax)
Top Wi-Fi standard	Wi-Fi 6 (802.11ax)
WLAN data transfer rate (max)	1201 Mbit/s
WLAN data transfer rate (first band)	300 Mbit/s
Antennas quantity	4
Internal memory	128 MB
Cabling technology	10/100/1000Base-T(X)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Output current	1 A
Power source type	AC, DC
Power consumption (typical)	12 W
Security algorithms	SSID, WPA3
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Product type	Tabletop router
Product color	White
Ethernet LAN (RJ-45) ports	3
Mobile network generation	-

Weight and Dimensions

Depth	163.5 mm
Width	257.6 mm
Height	29 mm
Weight	216 g