Hyundai IONIQ 6 2023 User Manual

6
6-29
Warning messages
Parking brake automatically engaged
B6003802
When EPB is applied while Auto Hold is
activated, a warning will sound and a
message will appear.
AUTO HOLD turning Off! Press brake
pedal
B6003904
When the conversion from Auto Hold to
EPB is not working properly a warning will
sound and a message will appear.
When this message is displayed, Auto
Hold and EPB may not operate. For your
safety, depress the brake pedal.
Press brake pedal to deactivate AUTO
HOLD
B6003905
If you did not apply the brake pedal when
you release Auto Hold by pressing the
AUTO HOLD switch, a warning will sound
and a message will appear.
Brake Disc Cleaning
Use the Brake Disc Cleaning function if
noise is generated when depressing the
brake while driving or if the brake disc
gets rusty. It helps reduce the noise and
rust. Regenerative braking is restrained
while Brake Disc Cleaning is operated,
which may lower the electric energy
efficiency. Press and hold the AUTO
HOLD button for over 3 seconds.
• Brake Disc Cleaning starts operating
when the message ‘Brake disc cleaning’
is displayed on the instrument cluster.
• Regenerative braking is restrained
while the brake is depressed about 10
times while driving (it may differ
depending on driving conditions). It
helps reduce the noise and rust.
• Brake Disc Cleaning function will turn
off automatically when the operation is
completed. It can also be turned off
before operation is completed by
turning off the vehicle or pressing the
AUTO HOLD button for over 3 seconds.
1BSLJOHCSBLF
BVUPNBUJDBMMZFOHBHFE
"650)0-%UVSOJOH0GG
1SFTTCSBLFQFEBM
1SFTTCSBLFQFEBMUP
EFBDUJWBUF"650)0-%
Hyundai_CE_en_US.book Page 29

Hyundai IONIQ 6 2023 Specifications

General

Brand	Hyundai
Model	IONIQ 6 2023
Category	Automobile
Language	English