Hyundai IONIQ 6 2023 User Manual

1
1-51
- For more information about the discharging limit, refer to the “Setting a Battery Discharging
Limit When Using Vehicle to Load (V2L)” section in this chapter.
- For more information about warnings, refer to the “Checking the warning and indicator
lights” section in this chapter.
Solving V2L Problems
If a problem occurs while using the V2L function, the V2L stops and a related messages
appears on the instrument cluster.
Check the cause of the message and take an appropriate measure referring to the table
below.
Message Cause Measure
V2L finished. Defined
charge level reached
The high voltage battery level
reaches the discharging limit
set level.
To use the V2L continuously,
make the discharging limit set
level lower than the present
battery level. (For more
information, refer to the
“Setting a Battery Discharging
Limit When Using Vehicle to
Load (V2L)”.)
Energy consumption
too high. V2L
cancelled
An electrical appliance that
exceeds the maximum power
output the vehicle can supply is
connected.
Check the total power
consumption of the electrical
appliance and replace it a
product within the V2L
maximum power output.
V2L conditions not
met
V2L is stopped for the following
reasons:
• V2L connector switch off
• V2L connector overheating
• Opening the charging door
while using the V2L indoor
outlet
Make sure there are no
problems with the V2L
connector and the vehicle
indoor outlet.
7-GJOJTIFE
%FGJOFEDIBSHF
MFWFMSFBDIFE
&OFSHZ
DPOTVNQUJPOUPP
IJHI
7-DBODFMMFE
7-DPOEJUJPOT
OPUNFU
Hyundai_CE_en_US.book Page 51

Hyundai IONIQ 6 2023 Specifications

General

Brand	Hyundai
Model	IONIQ 6 2023
Category	Automobile
Language	English