CP
Commands
and
Options
*
#CP
Use the asterisk (*) to annotate the terminal display screen
data with a comment. The format
of
the * (comment)
command is:
I anycomment
Use the
#CP
command to execute a
CP
command while in a
virtual machine command environment without first signaling
attention to get to the
CP
command environment. The
format of the
#CP
command is:
#CP
[commandlinel [#commandline2 #
...
]]
Where:
commandline
specifies the name and operands for the CP
command
or
commands you want to issue. You must
precede the first commandline with at least one
blank.
Usage Notes:
1.
The pound sign
(#)
shown in the preceding format
represents the logical line end symbol and
is
the default
supplied by
VM/PC.
However, you may choose to
redefine the logicallinend symbol.
If
you have redefined
the logical line end symbol,
#CP
is
an
invalid command;
you must substitute your line end symbol for the pound
sign when using this command.
2.
For
the command to operate, the following conditions
must
be
met:
7
-10
VM/PC
Users Guide
To Next Page
Loading...
Need help?
General
