1
ADVANCED OPERATIONS
1-13
Operating RTTY (FSK)
D RTTY DECODE SET screen
In this screen, you can set the log le type, time stamp
setting, and other RTTY settings�
1� Display the RTTY DECODE screen�
»
DECODE
2� Touch [EXPD/SET] for 1 second�
• Opens the RTTY DECODE SET screen�
3� Touch the item to set�
(Example: FFT Scope Averaging)
4� Touch the option to set� (Example: 2)
5� To close the RTTY DECODE SET screen, push
several times�
TIP: You can set each item to its default by touching
the item for 1 second, and then touching “Default” on
the QUICK MENU screen�
FFT Scope Averaging (Default: OFF)
Sets the FFT scope waveform averaging function to
between 2 and 4, or OFF�
L Use the default or smaller FFT scope waveform number
for tuning�
FFT Scope Waveform Color
(Default: R: 51, G: 153, B: 255)
Sets the waveform color for the FFT scope�
L Touch and select the R (Red), G (Green), or B (Blue)
scale, and then rotate
to adjust the level from 0
to 255�
L The color is displayed in the box above the RGB scale�
Decode USOS (Default: ON)
Turns the letter code decoding capability ON or OFF
after receiving a “space�”
L USOS stands for UnShift On Space function�
• ON: Decodes as a letter code�
• OFF: Decodes as a character code�
Decode New Line Code (Default: CR, LF, CR+LF)
Selects the internal RTTY decoder new line code�
L CR stands for Carriage Return, and LF stands for Line
Feed�
• CR,LF,CR+LF: Makes a new line with any code�
• CR+LF: Makes a new line with only a
CR+LF code�
TX USOS (Default: ON)
Explicitly inserts the FIGS character, even though it is
not required by the receiving station�
• ON: Inserts FIGS�
• OFF: Does not insert FIGS�
Font Color (Receive)
(Default: R: 128, G: 255, B: 128)
Font Color (Transmit)
(Default: R: 255, G: 106, B: 106)
Sets the text font color for received or transmit
characters�
L Touch and select the R (Red), G (Green), or B (Blue)
scale, and then rotate
to adjust the level from 0
to 255�
L The color is displayed in the box above the RGB scale�
To Next Page
Loading...
Need help?
General
