9
GPS OPERATION (ADVANCED)
9-19
GPS Memory
You can add GPS data to GPS Memory. You can add
your own position, other station’s position, or any
positions that are manually entered.
You can save up to 300 GPS memories, and
conveniently saved in up to 27 groups, from A ~ Z and
“(No Group).” The A to Z groups can also be named.
GPS Memory
(No Group)
B: HAM festa
A: ICOM
C: Railroad
Z:
Icom Osaka HC
Tokyo Big Sight
Dayton Hamventio
Group names are just
example.
Icom America
Friedrichshafen
D Adding a GPS Memory
Example: Add “HOME” into (No Group).
1. Adding a GPS Memory and entering the edit mode
1� Open the GPS MEMORY screen.
»
GPS > GPS MEMORY
2� Touch “(No Group).”
3� Push �
4� Touch “Add.”
• Opens the GPS MEMORY EDIT screen.
TIP: To edit the previously saved GPS Memory,
touch “Edit” in step 4. You can enter the content in
the same way as described above.
2. Entering a GPS Memory name
1� Touch “NAME.”
2� Enter a GPS Memory name of up to 16
characters. (Example: HOME)
3� After entering, touch [ENT].
3. Entering the GPS Memory date
1� Touch “DATE.”
2� Touch a digit to enter.
3� Touch [+] and [–].
L Set to between 2000/01/02 and 2099/12/30.
4� Repeat steps 2 and 3 to enter the date.
5� After entering, push �
4. Entering the GPS Memory time
1� Touch “TIME.”
2� Touch a digit to enter.
3� Touch [+] and [–].
L Set to between 00:00:00 and 23:59:59.
4� Repeat steps 2 and 3 to enter the time.
5� After entering, push �
To Next Page
Loading...
Need help?
General
