9
GPS OPERATION (ADVANCED)
9-20
GPS Memory
D Adding a GPS Memory
5. Entering the GPS Memory latitude
1� Touch “LATITUDE.”
2� Touch a digit to enter.
3� Enter the latitude.
L Set to between 0°00.00′ to 90°00.00′.
L You can change the unit.
»
SET > Display > Display Unit >
Latitude/Longitude
4� Repeat steps 2 and 3 to enter the latitude.
5� Touch [N/S] to set to a north latitude (N) or a south
latitude (S).
6� After entering, touch [ENT].
6. Entering the GPS Memory longitude
1� Touch “LONGITUDE.”
2� Touch a digit to enter.
3� Enter the longitude.
L Set to between 0°00.00′ to 180°00.00′.
L You can change the unit.
»
SET > Display > Display Unit >
Latitude/Longitude
4� Repeat steps 2 and 3 to enter the longitude.
5� Touch [E/W] to set to an east longitude (E) or a
west longitude (W).
6� After entering, touch [ENT].
7. Entering the GPS Memory altitude
1� Touch “ALTITUDE.”
2� Touch [+/–] to set to plus or minus.
3� Enter the altitude.
L Set to between –32808 and +32808 feet.
4� After entering, touch [ENT].
8. Selecting a GPS Memory group
1� Touch “GROUP.”
2� Touch the group between (No Group) and A ~ Z.
L You can save up to 300 Memories in each group.
To Next Page
Loading...
Need help?
General
