5
VOICE TX MEMORY FUNCTION
5-4
Transmitting a Voice TX memory content
You can transmit the Voice TX memory contents once,
or repeatedly� This is useful for transmitting your call
sign or name in some contests, or repeatedly calling
CQ�
D Transmitting
Transmits the prerecorded content� (p� 5-2)
1� Display the VOICE TX screen�
»
VOICE
2� Touch the desired Voice memory key [T1] ~ [T8]�
D Repeatedly transmitting
1� Display the VOICE TX screen�
»
VOICE
2� Touch the desired Voice memory key [T1] ~ [T8]
for 1 second�
• Transmits the recorded content once�
3� To close the VOICE TX screen, push �
When an external keypad is connected:
You can transmit the preset contents in the Voice
TX memory (T1 ~ T8) from an external device by
setting the “External Keypad,” and then connecting
an external keypad to the [ELEC-KEY] jack on the
IC-905�
»
SET > Connectors > External Keypad
The transmission’s remaining time
• Repeatedly transmits the recorded content�
L Information
• The recorded content is repeatedly transmitted for 10
minutes unless you manually stop transmission by
touching the selected memory�
• The Memory Timer counts down�
•
is displayed while repeatedly transmitting�
• You can set the pause interval between the repeated
transmissions in “Repeat Time” on the VOICE TX
SET screen� During this interval, the transceiver
returns to receive� (p� 5-5)�
• After 10 minutes have passed, and all of the recorded
content in the memory is transmitted, the transceiver
automatically returns to receive�
• When a signal is received in the interval between
transmissions, the transceiver pauses the next
transmission until the signal disappears� However, if
the squelch is set to open, the transceiver repeatedly
transmits after the repeat interval time expires, even
signals are received�
3� To close the VOICE TX screen, push �
TIP:
• If the “DATA OFF MOD” is set to “USB” or “LAN,” Voice
TX memories can not be transmitted�
»
SET > Connectors > MOD Input >
DATA OFF MOD
• You cannot transmit the audio in the ATV mode
when “ATV Audio Sub Carrier Frequency” is set to
“OFF�”
The transmission’s remaining timeRepeat icon
To Next Page
Loading...
Need help?
General
