1
ADVANCED OPERATIONS
1-4
Operating CW (ADVANCED)
D Using the Memory Keyer function (KEYER)
You can send preset characters using the Memory
Keyer function�
Sending
1� Display the KEYER screen�
»
KEYER
L The [KEYER] key is displayed only in the CW mode�
2� Push to turn ON the Break-in function�
(Basic manual)
3� Touch a Memory Keyer key between [M1] and
[M8]� (Example: [M1])
Count-up trigger
The Count-up trigger enables the serial number to be
automatically increased after each complete serial
number exchange is sent� (Default: M2)
Preset Keyer memory contents
Keyer
memory
Contents
M1 CQ TEST CQ TEST DE ICOM ICOM TEST
M2 UR 5NN 001 BK
M3 CFM TU
M4 QRZ?
L “001” is the CW contest number� If you want to set
the Count-up trigger to a dierent keyer, delete the “*”
(asterisk) from the Memory Keyer M2� (p� 1-5)
When an external keypad is connected:
You can transmit the preset contents in the Keyer
memory (M1 ~ M8) from an external device by
setting the “External Keypad,” and then connecting
an external keypad to the [ELEC-KEY] jack on the
IC-905�
»
SET > Connectors > External Keypad
L is displayed on the Memory Keyer set to the Count-up
trigger�
L You can change the Count-up trigger setting in the
KEYER 001 menu� (p� 1-6)
• The touched memory contents are sent�
4� To repeatedly send the memory contents, touch
the Memory Keyer key for 1 second�
Sending
memory
contents
L The memory contents will be repeatedly sent,
according to the setting in “Keyer Repeat Time�”
L To stop sending, touch the Memory Keyer key again�
Key Action
M1 ~ M8
Touch Sends the memory contents�
Touch for
1 second
is displayed and repeatedly
sends the memory contents�
You can change the repeat interval
setting in “Keyer Repeat Time” in
the CW-KEY SET menu� (p� 1-7)
–1
001
Reduces the contest number counter by 1
(001)�
• You can change or reset the number in
“Present Number” in the KEYER 001 menu�
(p� 1-6)
EDIT/SET Displays the EDIT/SET screen�
Repeat icon
Count-up trigger icon
Present number counter
To Next Page
Loading...
Need help?
General
