Draco tera
10 2020-02-26
2 Safety Instructions
To ensure reliable and safe long-term operation of your Draco tera please
note the following guidelines:
Installation
➔ Only use the device according to this User Manual. Failure to follow
these procedures could result in damage to the equipment or injury to
the user or installer.
➔ Only use in dry, indoor environments.
➔ The Draco tera and the power supply units can get warm. Do not
install components in an enclosed space without any airflow.
➔ Do not obscure ventilation holes.
➔ Only use power supplies originally supplied with the product or
manufacturer-approved replacements. Do not use a power supply if it
appears to be defective or has a damaged chassis.
➔ Connect all power supplies to grounded outlets. In each case, ensure
that the ground connection is maintained from the outlet socket
through to the power supply's AC power input.
➔ In case the device is equipped with one or more grounding screws, it
is obligatory to use these for normal operation in order to ensure the
grounding of the chassis.
➔ Do not connect the link interface to any other equipment, particularly
network or telecommunications equipment.
➔ Only connect devices to the serial interface that are protected against
short circuit currents and incorrect voltages at the serial interface.
➔ To disconnect the Draco tera from the power supply, remove the
power cord cables of all power supply units or switch supplies off.
➔ Take any required ESD precautions.
Repair
➔ Do not attempt to open or repair a power supply unit.
➔ Do not attempt to open or repair the Draco tera. There are no user
serviceable parts inside.
➔ Please contact your dealer or manufacturer if there is a fault.
To Next Page
Loading...
Need help?
General
