Ihse K480-288 User Manual

Configuration
2020-02-26 149
Pos: 87 /806-IHSE/ Konfiguration /480_Konsolen- Einstellunge n/480-xx/Exte nder OSD @ 8\m od_135150 2028499_6.doc @ 69501 @ 3 @ 4
5.13.3 Extender OSD
In this menu the settings for the Extender OSD can be adjusted. These
are local settings that can be made individually for each console.
You can select the following Extender OSD settings:
Field
Selection
Description
Enable CPU
Selection List
activated
When executing the key sequence for
opening the OSD, a selection list for
switching CPU Devices will be displayed
in the center of the monitor. Pressing the
<F7> button within the selection list
opens the standard OSD.
deactivated
Function not active (default)
Enable
Connection
Info
activated
Enable Extender OSD (default: YES)
deactivated
Function not active
Update
Connection
Info
activated
Update connection changes during fade-
in of Extender OSD (default: YES)
deactivated
Function not active
Display Time
0-999
seconds
Duration of OSD fade-in (default: 10)
Horizontal
Position
10 pixels
Horizontal OSD position (default: -2)
Vertical
Position
10 pixels
Vertical OSD position (default: 2)
When setting the horizontal OSD position, a prefixed minus describes the
orientation to the right edge of the monitor, e.g. -2 means 2 x 10 = 20
pixels to this edge. When setting a vertical position, a prefixed minus
describes the orientation to the bottom edge of the monitor.
If the Update Connections function is deactivated, the Extender OSD
only appears when switching via OSD.
You have the following options to access the menu:

Ihse K480-288 Specifications

General

Brand	Ihse
Model	K480-288
Category	Switch
Language	English