Configuration
2020-02-26 171
5.14.2 Saving of Configurations (internal)
In this menu the current matrix configuration is saved to predefined
storage locations. However, it does not replace the buffering of
configuration (see Chapter 5.14.1, Page 170).
You have the following options to access the menu:
In Active, the name and detailed information of the current configuration
are shown. This configuration can be saved.
In Default and File #1 to File #8, the name and detailed information of the
respective saved configuration are shown. These storage locations can be
overwritten.
The storage location to be overwritten by the current configuration must be
selected explicitly.
The current configuration will be saved to this storage location and will be
shown immediately in the menu. The previously saved configuration saved
to this storage location is deleted.
To Next Page
Need help?
General
