Configuration
2020-02-26 133
Function not active (default).
Force switching to the respective CPU
only in Private Mode.
Function not active (default).
Force showing a colored frame when
switching to the respective CPU. You can
select between 7 colors.
Activate a reference CPU Device that
inherits both Device and extender
settings to any CPU Unit that is
connected to the matrix for the first time.
Note: It is recommended to activate the
reference setting for one single CPU
Device only.
Function not active (default).
Open a pop-up window after switching to
the particular CPU Device. In the
background a Video Only connection will
be established. It requires a confirmation
in the pop-up window to establish a Full
Access connection to the CPU Device.
Function not active (default).
The CPU Device name will be highlighted
according to the color setting for text and
background. You can select between 16
colors.
Activate an access limitation for the case
that a CPU Device is already connected
via Full Access connection. When having
the same priorities, any additional access
to the CPU Device can only be
established with a Video Only
connection. Having a lower priority any
additional connection is not possible.
Only when having a higher priority, an
additional Full Access connection can be
established and and K/M control can be
taken over.
Function not active (default).
To Next Page
Loading...
Need help?
General
