Draco tera
162 2020-02-26
OSD (simple configuration for Single-Head applications)
➔ Select Assignments > Multi-Screen Control in the main menu.
Menu Assignments – Multi-Screen Control
In order to configure the Multi-Screen Control, proceed as follows:
1. In the Arrangement field, select the layout for the CON Device you
want to configure (1 x 4 or 2 x 2).
The fields for the configuration of the individual displays will be
arranged accordingly.
2. Activate Manual option, if USB-HID switching is to be restricted to
keyboard commands (see Chapter 6.7, Page 221).
Manual switching allows the use of multi-head consoles.
3. Ensure that the Enabled option is set to Y on all displays in order to
activate the respective display for Multi-Screen Control.
4. Select one or more control displays within the CON Device by setting
the Control function to Y in the display field.
Control displays are referred to the extender units within the Multi-
Screen Control that are connected to keyboard and mouse.
To Next Page
Loading...
Need help?
General
