INVT CHV Series User Manual

Detailed Function Description
65
Setting
value
Function Description
21
ACC/DEC
time
selection1
22
ACC/DEC
time selection
2
4 groups of ACC/DEC time can be selected by the
combination of these two terminals.
ACC/DEC
time
selection 2
ACC/DEC
time
selection1
ACC/DEC time
OFF OFF
ACC/DEC time 0
(P0.11、P0.12)
OFF ON
ACC/DEC time 1
(P8.00、P8.01)
ON OFF
ACC/DEC time 2
(P8.02、P8.03)
ON ON
ACC/DEC time 3
(P8.04、P8.05)
23
Reset simple
PLC when
stop
When simple PLC stops, the status of PLC such as
running step, running time and running frequency will be
cleared when this terminal is enabled.
24
Pause simple
PLC
Inverter runs at zero frequency and PLC pauses the timing
when this terminal is enabled. If this terminal is disabled,
inverter will start and continue the PLC operation from the
status before pause.
25 Pause PID
PID adjustment will be paused and inverter keeps output
frequency unchanged.
26
Pause
traverse
operation
Inverter keeps output frequency unchanged. If this
terminal is disabled, inverter will continue traverse
operation from current frequency.
27
Reset
traverse
operation
Reference frequency of inverter will be forced as center
frequency of traverse operation.
28 Reset counter Clear the value of counter.
29 Reset length Clear the value of actual length (P8.20).
30
ACC/DEC
ramp hold
Pauses acceleration or deceleration and maintains output
frequency. When this terminal is disabled,
acceleration/deceleration is restarted.
31
Disable torque
control
Torque control is disabled. Inverter will work in speed
control mode.
32~52 Reserved Reserved for water supply control.

INVT CHV Series Specifications

General

Brand	INVT
Model	CHV Series
Category	DC Drives
Language	English