Quick Reference
Flag Function
Description
Flag Function Description
SRQ Serial request query Prot Protections occur
CW Power supply in CP
mode
Trig Power supply in triggering
state
2.6 Rear Panel Introduction
Different models of IT6500C Series power supply have different rear panels. 4U
models have same rear panels as 2U Model except system bus and AC input
terminal. The cabinets have same rear panels. The rear panels are shown as
below.
No. Name Description
1 GPIB interface GPIB connector interface. Can be selected to use
from front panel menu.
Only for IT6500C(G) series.
2 RS232 interface RS232 connector interface. Can be selected to
use from front panel menu.
3 LAN interface LAN connector interface. Can be selected to use
from front panel menu.
4 USB interface USB connector interface. Can be selected to use
from front panel menu.
5 Fan Fan for cooling the device.
6 Ground screw Ground screw for making chassis ground
connections
7 AC power input
socket and cover
Used to connect AC power to start instrument
8 The positive termi-
nal of output
The positive terminal of output for connecting
DUT.
9 Sense terminals Remote sense terminals, used for maximizing
measurement accuracy
10 The negative ter-
minal of output
The negative terminal of output for connecting
DUT
Copyright © Itech Electronic Co., Ltd.
15
To Next Page
Loading...
Need help?
General
