To Next Page

To Previous Page

Function and Features

IT6515C~IT6595C 10V

IT6516C~IT6596C 15V

IT6517C~IT6597C 20V

3.13 Setting Maximum and Minimum Values

The maximum voltage of the power supply ranges from V-min to full-rated

output voltage. Press the composite key [Shift] + [V-set] (Setup) to enter the

Configuring Menu for setting maximum and minimum values of power supply

voltage, current and power , maximum and minimum values of load current and

power. When limit setting is finished, the voltage, current and power setting

values can only be set within the maximum and minimum limits.

Function and external analog programming are not limited by Limit.

Set the maximum and minimum voltages as follows:

1. Press the composite key [Shift]+[V-set](Setup) to enter the Configuring

Menu.

2. Select Source in the menu and press [Enter] for confirmation.

Or, the user can select “Load” to set the load Limit. For load, you can only

set the maximum and minimum limits of the current and power.

3. Select Limit with Left/Right key and press [Enter] for confirmation.

4. Set the V-Max with numeric key and press [Enter].

5. Set the V-Min with numeric key and press [Enter] for confirmation.

Or, select the maximum/minimum current or power with Arrow key.

6. Set maximum/minimum current or power with numeric key or press [Esc] to

exit menu setting.

After the maximum/minimum voltage is set, the output voltage can only be

set within this range. Vmax factory setting is the rated output voltage of

corresponding model of the power supply. V-Min is 0V.

ITech IT6500C Series User Manual

Other manuals for ITech IT6500C Series