Copyright © ITECH Electronic Co., Ltd. 9
1.3 Connecting the Power Cord
Before Connecting the Power Cord
Connect power cord of standard accessories and ensure that the electronic
load is under normal power supply.
⚫ The power cords supplied with this product is certified for safety. In
case the supplied lines assembly needs to be replaced, or an
extension lines must be added, be sure that it can meet the required
power ratings of this product. Any misuse voids the warranty of this
product.
⚫ Before connecting power cord, be sure to switch off the instrument.
Power switch is in Off position.
⚫ To avoid fire or electric shock, Make sure to use the power cord
supplied by ITECH.
⚫ Be sure to connect the main power socket to the power outlet with
protective grounding. Do not use terminal board without protective
grounding.
⚫ Do not use an extended power cord without protective grounding,
otherwise the protection function will fail.
Categories of Power Cords
⚫ We provide standard power cords for IT8615/IT8615L and IT8616/IT8617
side plate structure. Please select appropriate power cords appropriate to
local voltage based on the specifications of power cords below. If
purchased model fails to meet local voltage requirements, please contact
distributor or factory for change.
America, Canada,
Japan
IT-E172
⚫ The power cord of IT8616(15U cabinet)/IT8617(15U cabinet)/IT8624
/IT8625/IT8626/IT8627/IT8628 electronic load is shown in the next figure.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
