− 109 −
1) Level 1
Memory switch data (level 1) are the motion data that the sewing machine has in common and the data that
operate on all sewing patterns in common.
14-2 Memory switch data list
No.
Item
Setting range Edit unit
Initial display
Reverse stitching at the sewing start selection
Select from among three kinds of without, single and double.
: Without : Single : Double
Reverse stitching at the sewing end selection
Select from among three kinds of without, single and double.
: Without : Single : Double
Number of stitches of reverse stitching
Number of stitches at the sewing start and
that at the sewing end are set.
Reverse stitching speed
Speed of the reverse stitching at the
sewing start and the sewing end is set.
Needle position at the time of stop
Needle position at the time of temporary stop during sewing
is selected.
: DOWN : UP
Number of stitches of soft start setting
Number of stitches of soft start at the
sewing start is set.
Soft start speed setting
Speed of soft start at the sewing start is
set.
Condensation sewing selection
Select from among four kinds of without, start only, end only
and both start and end.
: Without : Start
: End : Both
Number of stitches of condensation
Number of stitches of condensation sewing
is set.
Condensation speed setting
Speed of condensation sewing is set.
Base tension in waiting state
Base tension in waiting state (except during
sewing) is set.
– – –
– – –
0 to 19
200 to 3000
– – –
0 to 9
200 to 2000
– – –
0 to 9
200 to 2000
0 to 200
– – –
– – –
1 stitch
10rpm
– – –
1 stitch
10rpm
– – –
1 stitch
10rpm
1
Without
Without
5 stitches
800rpm
DOWN
0 stitch
800rpm
Without
0 stitch
800rpm
20
To Next Page
Loading...
Need help?
General
