− 150 −
IP-200
Transmit data
1
2
Data created with PM-1 (sewing data creation and edit software) can be sewn on trial by on-line connection
of the personal computer with the sewing machine.
18. TRIAL SEWING FUNCTION
Connect the personal computer with IP-200 and transmit data to the sewing machine after creation of data
with PM-1. When IP-200 becomes the data input screen, automatically the trial sewing screen is displayed.
For the operating procedure of PM-1, see HELP of PM-1 or the like.
1) Receive the trial sewing data from PM-1.
When the trial sewing data (vector format data) is
transmitted from PM-1, the screen on the left side
is displayed, and the transmitted data is displayed
in the center of the screen.
The display corresponds with the length between
steps set with PM-1.
2) Edit the vector parameter.
Vector format data transmitted from PM-1 is
converted to the parameter that can be set with
the sewing machine. Thereby, it is possible to
perform the same edit as the normal pattern.
• When STEP DETAILS button 1 is pressed,
the step details setting screen is displayed.
•When SEWING DATA DISPLAY button 2
is pressed, the sewing data setting screen is
displayed.
18-1 Performing trial sewing
To Next Page
Loading...
Need help?
General
