4.7 Check the gear oil level
Check the gear oil level
Requirements
– Park the truck securely, see page 70.
Tools and Material Required
– Oil sump
Procedure
• Place the oil sump underneath the transmission
• Remove the front panel (67), see page 173.
• Turn the tiller to the right limit position.
• Check transmission oil level, if necessary add the right grade through the filler
hole .
Z
The oil level should reach the bottom mark of the oil dipstick .
The transmission oil level is now checked.
176
04.19 en-GB
To Next Page
Loading...
Need help?
General
