4.6 Specifications according to RED guideline (Radio Equipment
Directive) for radio units
Z
The table contains any components installed according to the European Directive
2014/53/EU. The table shows the affected frequency range and the emitted
transmission power for each component.
Component Frequency range Transmission power
Radio module (ISM Online) 433,05 - 434,79 MHz < 10 mW
Gateway (ISM Online) 433,05 - 434,79 MHz < 10 mW
Access module (ISM Online) 13,56 MHz < 100 mW
Transponder reader 13,56 MHz < 100 mW
4.7 Conditions of use
Ambient temperature
– without cold store equipment: operating at -10 °C to +40 °C, see page 13
– with cold store equipment: operating at -28 °C to +25 °C, see page 13
Z
Special equipment and authorisation are required if the truck is to be used
continually in conditions of extreme temperature or condensing air humidity
fluctuations.
4.8 Electrical requirements
4.8.1 Electrical Requirements
The manufacturer certifies compliance with the requirements for the design and
manufacture of electrical equipment, according to EN 1175 "Industrial Truck Safety -
Electrical Requirements", provided the truck is used according to its purpose.
4.9 Safety of trucks
The manufacturer confirms adherence to the requirement for design and
manufacture of the truck with regard to the safety requirements specific to intended
use in accordance with DIN EN ISO 3691-1.
28
04.19 en-GB
To Next Page
Loading...
Need help?
General
