Jungheinrich EJD 220 User Manual

2.2 Battery discharge indicator
When the truck has been released via the key
switch, CanCode or ISM, the battery charge status
is displayed. The LED colours (66) represent the
following conditions:
LED colour Charge status
Green 40–100%
Orange 30–40%
Green/orange
flashes at 1 Hz
20–30%
Red 0–20%
Z
If the LED is red, the load can no longer be lifted. Lifting is only enabled when the
battery connected is at least 70% charged.
If the LED flashes red and the truck is not ready for operation, inform the
manufacturer's service department. Red flashing is a truck controller code. The
flashing sequence indicates the type of fault.
66
66
04.19 en-GB

Jungheinrich EJD 220 Specifications

General

Brand	Jungheinrich
Model	EJD 220
Category	Forklifts
Language	English