3.3 Checks and operations to be carried out when the truck is
operational
WARNING!
Risk of accident due to damage to or other defects in the truck and optional
features
If damage or other truck or attachment (optional equipment) defects are discovered
during the following checks, the truck must be taken out of service until it has been
repaired.
u
Report any defects immediately to your supervisor.
u
Mark defective truck and take out of service.
u
Do not return the industrial truck to service until you have identified and rectified
the fault.
Procedure
• Test warning indicators and safety equipment:
• Test the emergency disconnect function by pressing the emergency disconnect
switch. The main circuit is disconnected and no truck operations can be
performed. Now pull the emergency disconnect switch to unlock it.
• Test the horn by pressing the "warning signal" button.
• Check braking efficiency, see page 80.
• Test the steering, see page 79.
• Test the hydraulic system, see page 82.
• Test travel operations, see page 76.
• Test the "collision safety switch" by depressing it whilst driving in the drive
direction.
• Test the controls and displays and check for damage, see page 61.
69
04.19 en-GB
To Next Page
Loading...
Need help?
General
