C Transport and Commissioning
1 Lifting by crane
WARNING!
All persons involved in loading by crane must be trained
Incorrect crane loading procedures due to untrained personnel can cause the truck
to fall. There is a risk of injury to personnel and a risk of material damage to the
truck.
u
Loading must only be performed by specialist personnel trained for this purpose.
The specialist personnel must be instructed in securing loads on road vehicles and
handling load securing devices. In each case correct measurements must be
taken and appropriate safety measures applied.
WARNING!
Improper loading by crane can result in accidents
Improper use or use of unsuitable lifting gear can cause the truck to crash when
being loaded by crane.
Prevent the truck from hitting other objects during lifting, and avoid uncontrolled
movements. If necessary, secure the truck with guide ropes.
u
The truck may be loaded only by people who are trained in using lifting
accessories and lifting gear.
u
Wear personal protective equipment (e.g. safety shoes, safety helmet, hi-vis
jacket, protective gloves) when loading by crane.
u
Do not stand under suspended loads.
u
Do not walk into or stand in a hazardous area.
u
Always use lifting gear with sufficient capacity (for truck weight, see truck data
plate).
u
Always attach the crane lifting gear to the prescribed attachment points and
prevent them from slipping.
u
Use the lifting accessories only in the prescribed load direction.
u
Crane lifting gear must be fastened in such a way that it does not come into
contact with any attachments when lifting.
39
04.19 en-GB
To Next Page
Loading...
Need help?
General
