EasyManuals Logo
Home>Jungheinrich>Forklifts>ERC 214z

Jungheinrich ERC 214z User Manual

Jungheinrich ERC 214z
248 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
4 Charging the battery
WARNING!
The gases produced during charging can cause explosions
The battery gives off a mixture of oxygen and hydrogen (electrolytic gas) during
charging. Gassing is a chemical process. This gas mixture is highly explosive and
must not be ignited.
u
Switch the charging station and truck off first before connecting/disconnecting the
charging cable of the battery charging station to/from the battery connector.
u
The charger must match the battery in terms of voltage, charge capacity and
battery type.
u
Before charging, check all cables and plug connections for visible signs of
damage.
u
Ventilate the room in which the truck is being charged.
u
The battery cover must be open and the battery cell surfaces must be exposed
during charging to ensure adequate ventilation.
u
Do not smoke and avoid naked flames when handling batteries.
u
Wherever an industrial truck is parked for charging there must be no inflammable
material or consumables capable of creating sparks within a minimum distance of
2 m from the truck.
u
Fire-control equipment must be available.
u
Do not place any metallic objects on the battery.
u
Always follow the safety regulations of the battery and charger station
manufacturers.
NOTICE
Battery damage
The battery, charger (charge characteristics) and battery parameters must match
each other, otherwise damage may result.
48
04.19 en-GB

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jungheinrich ERC 214z and is the answer not in the manual?

Jungheinrich ERC 214z Specifications

General IconGeneral
BrandJungheinrich
ModelERC 214z
CategoryForklifts
LanguageEnglish

Related product manuals