EasyManuals Logo
Home>Jungheinrich>Forklifts>ERC 214z

Jungheinrich ERC 214z User Manual

Jungheinrich ERC 214z
248 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #72 background imageLoading...
Page #72 background image
2.1 Battery discharge monitor
Z
The standard setting for the battery discharge indicator / discharge monitor is based
on standard batteries. When using maintenance-free or special batteries, the display
and cut-out points of the battery discharge monitor must be set by manufacturer's
service department. If this adjustment is not made, the battery may become
damaged due to deep discharge.
NOTICE
Full discharge can damage the battery
Self-discharge can cause the battery to fully discharge. Full discharge shortens the
useful life of the battery.
u
Charge the battery at least every 2 months.
Z
Charge the battery see page 48.
If the residual capacity falls below the required level, lifting is inhibited. An alternating
display (65) appears. Lifting is only released when the battery connected is at least
70% charged.
70
04.19 en-GB

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jungheinrich ERC 214z and is the answer not in the manual?

Jungheinrich ERC 214z Specifications

General IconGeneral
BrandJungheinrich
ModelERC 214z
CategoryForklifts
LanguageEnglish

Related product manuals