Transportation and Delivery
Operating Instructions for Powador .-. TL_EN Page
EN
. Identication
Identifying the unit
ඣ You will nd the name plate with product-specic data for service and
other requirements specic to installation on the right side panel of
the inverter. This data includes:
• Product name
• Part no.
• Serial no.
• Date of manufacture
• Technical Data
• Disposal information
• Certication marking, CE marking.
Typ / Type
Powador 72.0 TL3 - XL - INT -
Park
Seriennummer
/ serial no.
*
KACO new energy GmbH
Artikelnummer
/ part no.
1000521
Carl-Zeiss-Str. 1
74172 Neckarsulm
MADE IN GERMANY
Max. Eingangsleistung / input power DC 72000 W
Max. Eingangsstrom / input current DC / Isc PV 3x36A|3x43,2A
Max. Eingangsspannung / input voltage DC 1000 V
Min. Eingangsspannung / input voltage DC
200 V
MPP-Spannungsbereich / MPP voltage range DC 580 - 850 V
Umgebungstemperatur / ambient temperature -20 °C ... +60 °C
Schutzklasse | Schutzart / protection class | protection 1 / IP54
Cos phi
0,8 ind. - 0,8 cap.
Nennspannung / rated output voltage AC
480 V / 277 V 3/N/PE
Frequenz / rated frequency 50 Hz / 60 Hz
Nennleistung DE / rated output power AC INT
60000 VA
Nennstrom DE / rated output current AC INT 3 x 72,2 A
Netzüberwachung / grid monitoring VDE V 0126-1-1 + A1 / country specific
Jahr / year Q1 / 2016
galvanisch nicht getrennt / no galvanic isolation
Dep. on country settings all specific requirements are
met, details see manual.
Figure : Name plate
Transportation and Delivery
Every inverter leaves our factory in proper electrical and mechanical condition. Special packaging ensures that the
units are transported safely. The shipping company is responsible for any transport damage that occurs.
. Scope of delivery
• inverter
• Housing cover: Cover plates right and left, cover
• Installation kit
• Documentation
Checking your delivery
. Inspect your inverter thoroughly.
. Immediately notify the shipping company in case of the following:
– Damage to the packaging that indicates that the inverter may have been damaged
– Obvious damage to the inverter
. Send a damage report to the shipping company immediately.
The damage report must be received by the shipping company in writing within six days following receipt of the
inverter.
We will be glad to help you if necessary.
. Transportation
CAUTION
Impact hazard, risk of breakage to the inverter
› Pack the inverter securely for transport.
› Carefully transport the inverter using the transportation pallet.
› Do not subject the inverter to shocks.