Disposal
Operating Instructions for Powador .-. TL_EN Page
EN
. Uninstalling the device
ඣ Inverter disconnected and secured against restart.
. Unlock and open the housing door.
. Open the connection cover connection area.
. Remove the interface cable.
. Release the DC and AC cables from the connection terminals.
. Open the cable ttings.
. Pull out the cables.
» The inverter is uninstalled. Proceed with disassembly.
. Disassembling the unit
CAUTION
Risk of injury if the inverter tips over!
Risk of tipping due to high centre of gravity, particularly with the door open.
› Secure the inverter to prevent tipping before disassembly.
› Close and lock the doors of the inverter.
› Only then remove the wall and oor fastenings.
ඣ Shut down the inverter.
ඣ Uninstall the inverter.
. Remove the inverter fastening.
. Securely pack up the inverter if it is to be used later
or
have the inverter disposed of professionally.
. Packaging the unit
ඣ The inverter is uninstalled.
. If possible, always pack the inverter in the original packaging. If this is no longer available, an alternative is to
use equivalent packaging.
. You must be able to close the box completely and it must be able to accommodate the weight and size of the
inverter.
. Storing the unit
ඣ The inverter is packed.
" Store the inverter in a dry place, in accordance with the ambient temperature range (see chapter Table on
page ).
Disposal
CAUTION
Risk to the environment if disposal is not carried out in the correct manner
For the most part, both the inverter and the corresponding transport packaging are made from recy-
clable raw materials.
Unit: Do not dispose of faulty inverters or accessories together with household waste. Ensure that
the old unit and any accessories are disposed of in a proper manner.
Packaging: Ensure that the transport packaging is disposed of properly.
To Next Page
Loading...
Need help?
General