Configuration and Operation
Operating Instructions for Powador .-. TL_EN Page
EN
. Initial start-up
When started for the rst time, the inverter displays the conguration assistant. It takes you through the settings neces-
sary for the initial start-up.
NOTE
After conguration is completed, the conguration assistant does not appear again when the
inverter is restarted. You can then change the country setting only in the password-protected param-
eter menu. The other settings can still be changed in the Settings menu.
NOTE
The DC and AC power supply must be guaranteed during conguration.
The sequence of the settings required for initial start-up is preset in the conguration assistant.
Navigation
" In order to select a setting, press the up and down buttons.
" To select the next menu item, press the Enter button.
" To return to the most recently selected menu item, press the ESC button.
" Set the required settings.
" Press the Enter button in the last menu item.
Initial conguration
" Select the menu language.
" Select the country of operation with grid type.
" Set the date and time.
" To store the set operator country and grid type permanently, conrm these settings with "Yes".
» You have completed the initial conguration. The inverter begins to operate.
. Menu structure
.. Display on the LCD
1
3
4
2
Figure : Main menu
Key
1 Selected menu item 3 Menu items of the active menu level
2 Name of the active menu level 4 Menu items of the next lower menu level
To Next Page
Loading...
Need help?
General