To Next Page

To Previous Page

PREFACE

Preface

The described hard- and software are developments of the KEB Automation KG. The

enclosed documents correspond to conditions valid at printing. Misprint, mistakes and

technical changes reserved.

Signal words and symbols

Certain operations can cause hazards during the installation, operation or thereafter.

There are safety informations in the documentation in front of these operations. Security

signs are located on the device or machine. A warning contains signal words which are

explained in the following table:

DANGER

Dangerous situation, which will cause death or serious injury in case of

non-observance of this safety instruction.

WARNING

Dangerous situation, which may cause death or serious injury in case of

non-observance of this safety instruction.

CAUTION

Dangerous situation, which may cause minor injury in case of non-ob-

servance of this safety instruction.

NOTICE

Situation, which can cause damage to property in case of non-obser-

vance.

RESTRICTION

Is used when certain conditions must meet the validity of statements or the result is

limited to a certain validity range.

Is used when the result will be better, more economic or trouble-free by follow-

ing these procedures.

More symbols

► Thisarrowstartsanactionstep.

• / - Enumerations are marked with dots or indents.

=> Cross reference to another chapter or another page.

Note to further documentation.

KEB COMBIVERT 19F5 Series User Manual

Questions and Answers: