Keithley 2002 User Manual

Front Panel Operation
2-88
Table 2-41
Main menu structure
Menu item Description
SAVESETUP
SAVE
RESTORE
POWERON
BENCH
GPIB
USER-SETUP-NUMBER
RESET
BENCH
GPIB
Setup menu:
Save setup at a memory location (up to 1, 5, or 10).
Return 2002 to setup stored at a memory location (up to 1, 5, or 10).
Power-on Menu:
Power on to bench default setup conditions.
Power on to GPIB default setup conditions.
Power on to setup stored at a memory location (up to 1, 5, or 10).
Reset Menu:
Return 2002 to bench default setup.
Return 2002 to GPIB default setup.
GPIB
ADDRESSABLE
TALK-ONLY
FEED
AFTER-CALC
BEFORE-CALC
NONE
INTERFACE
IEEE-488
CENTRONICS
INTERVAL
FORMFEED
CONTROL
SET-PAGE-SETUP
ELEMENTS
STATUS
GPIB/Printer Setup menu:
Check/change IEEE-488 bus address (0-30).
GPIB/Printer Talk-only mode menu:
GPIB Output Feed menu:
Specify reading after math operation.
Specify reading before math operation.
Specify no readings.
Select printer interface.
Specify IEEE-488 printer.
Specify Centronics parallel printer.
Specify printing interval (every reading to 1 out of 9999).
Formfeeds menu:
Enable/disable page breaks.
Set number line between form feeds (1-255).
Select GPIB data elements (reading, units, reading number, channel number,
timestamp, status).
Display IEEE-488 bus status byte.
CALIBRATION
COMPREHENSIVE
POINT CAL
CALIBRATION-DATES
Calibration menu:
Perform DC and AC calibration.
Perform point calibrations.
Check/change calibration date.
TEST
BUILT-IN-TEST
AUTOMATIC
MANUAL
DIAGNOSTICS
FRONT-PANEL-TESTS
KEYS
DISPLAY-PATTERNS
Self-test menu:
Test analog and digital boards.
Run all tests automatically.
Select tests to run.
Factory diagnostic tests.
Test display board.
Verify operation of front panel keys.
Verify operation of display.

Keithley 2002 Specifications

General

Brand	Keithley
Model	2002
Category	Multimeter
Language	English