Keithley 2002 User Manual

IEEE-488 Reference
3-60
Table 3-12
STATus command summary
Command Description
Default
parameter SCPI Ref.
:STATus
:MEASurement
[:EVENt]?
:ENABle <NRf>
:ENABle?
:PTRansition <NRf>
:PTRansition?
:NTRansition <NRf>
:NTRansition?
:CONDition?
:OPERation
[:EVENt]?
:ENABle <NRf>
:ENABle?
:PTRansition <NRf>
:PTRansition?
:NTRansition <NRf>
:NTRansition?
:CONDition?
:ARM
[:EVENt]?
:ENABle <NRf>
:ENABle?
:PTRansition <NRf>
:PTRansition?
:NTRansition <NRf>
:NTRansition?
:CONDition?
:SEQuence
[:EVENt]?
:ENABle <NRf>
:ENABle?
:PTRansition <NRf>
:PTRansition?
:NTRansition <NRf>
:NTRansition?
:CONDition?
:TRIGger
[:EVENt]?
:ENABle <NRf>
:ENABle?
:PTRansition <NRf>
:PTRansition?
:NTRansition <NRf>
:NTRansition?
:CONDition?
Path to control measurement event registers:
Read the event register.
Program the enable register.
Read the enable register.
Program the positive transition register.
Read the positive transition register.
Program the negative transition register.
Read the negative transition register.
Read the condition register.
Path to control operation status registers:
Read the event register.
Program the enable register.
Read the enable register.
Program the positive transition register.
Read the positive transition register.
Program the negative transition register.
Read the negative transition register.
Read the condition register.
Path to control arm event registers:
Read the event register.
Program the enable register.
Read the enable register.
Program the positive transition register.
Read the positive transition register.
Program the negative transition register.
Read the negative transition register.
Read the condition register.
Path to control sequence status registers:
Read the event register.
Program the enable register.
Read the enable register.
Program the positive transition register.
Read the positive transition register.
Program the negative transition register.
Read the negative transition register.
Read the condition register.
Path to control trigger status registers:
Read the event register.
Program the enable register.
Read the enable register.
Program the positive transition register.
Read the positive transition register.
Program the negative transition register.
Read the negative transition register.
Read the condition register.
(Note 2)
(Note 3)
(Note 4)
(Note 5)
(Note 2)
(Note 3)
(Note 4)
(Note 5)
(Note 2)
(Note 3)
(Note 4)
(Note 5)
(Note 2)
(Note 3)
(Note 4)
(Note 5)
(Note 2)
(Note 3)
(Note 4)
(Note 5)
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
3.20.1
3.20.2
3.20.3
3.20.4
3.20.5
3.20.1
3.20.2
3.20.3
3.20.4
3.20.5
3.20.1
3.20.2
3.20.3
3.20.4
3.20.5
3.20.1
3.20.2
3.20.3
3.20.4
3.20.5
3.20.1
3.20.2
3.20.3
3.20.4
3.20.5

Keithley 2002 Specifications

General

Brand	Keithley
Model	2002
Category	Multimeter
Language	English