Keithley 2002 User Manual

IEEE-488 Conformance Information
E-6
:TEMP:RTD:BETA :TEMP:RTD:TYPE USER
:TEMP:RTD:DELT :TEMP:RTD:TYPE USER
:TEMP:RTD:RZER :TEMP:RTD:TYPE USER
:TEMP:TC:TYPE :TEMP:DIG varies per TC type TEMP:DIG:AUTO is ON
:ROUT:CLOS :ROUT:SCAN:LSEL NONE
:ROUT:OPEN :ROUT:SCAN:LSEL NONE the command actually
opens a channel
:ROUT:OPEN:ALL :ROUT:SCAN:LSEL NONE
:ROUT:SCAN:INT :ROUT:SCAN:LSEL INT
:ROUT:SCAN:RAT:FUNC ...:AVER:STAT
...:AVER:COUN
...:AVER:TCON
...:AVER:ADV:STAT
...:AVER:ADV:NTOL n
varies per function
varies per function
varies per function
varies per function
varies per functio
...AVER:AUTO is ON
...AVER:AUTO is ON
...AVER:AUTO is ON
...AVER:AUTO is ON
...AVER:AUTO is ON
:ROUT:SCAN:LSEL ...:AVER:STAT varies per function
...:AVER:COUN
...:AVER:TCON
...:AVER:ADV:STAT
...:AVER:ADV:NTOL
:FUNC
:FUNC
:ROUT:CLOS
:ROUT:CLOS
varies per function
varies per function
varies per function
varies per function
varies per function
:ROUT:SCAN:RAT:FU
NC
:ROUT:SCAN:DELT
:FUNC
:ROUT:SCAN:RAT
:MCH
:ROUT:SCAN:DELT
:MCH
...AVER:AUTO is ON
...AVER:AUTO is ON
...AVER:AUTO is ON
...AVER:AUTO is ON
...AVER:AUTO is ON
ROUT:SCAN:LSEL is
RAT
ROUT:SCAN:LSEL is
DELT
ROUT:SCAN:LSEL is
RAT
ROUT:SCAN:LSEL is
DELT
... = Valid function command words (i.e. :VOLT:DC, :VOLT:AC, etc.)
Table E-2 (cont.)
Coupled commands
Command Also changes To If

Keithley 2002 Specifications

General

Resolution	8.5 digits
DC Voltage Accuracy	±0.0006%
Maximum DC Voltage	1000 V
Maximum AC Voltage	750 V
Maximum DC Current	3 A
Maximum AC Current	3 A
Connectivity	GPIB, RS-232
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Resistance Range	10 Ω to 1 GΩ
Model	2002
Category	Multimeter
Interface	GPIB, RS-232
AC Current Accuracy	±0.1%
Frequency Range	0.1Hz to 300kHz
Display	VFD
Type	Digital
Power Supply	100-240V AC, 50/60Hz
Current Range (DC)	100 μA to 3 A
Current Accuracy (DC)	±0.01%
Current Range (AC)	100 μA to 3 A
Current Accuracy (AC)	±0.1%
DC Current Range	100 μA to 3 A
AC Current Range	100 μA to 3 A