Manual Buttonhole (Option)
OStitch selector: _] (BH)
(_ Stitch width: 3 to 6,5
(_ Stitch length: 0.25 to 1+0
(_ Needle thread tension: 2 to 6
(_ Presser foot B: Buttonhole foot
. To sew
If the diameter of the button is more than 1,0" (2+5 cm), a
buttonhole must be made manually as follows:
[_ Turn the handwheel toward you to raise the needle to
its highest position. Raise the presser foot_
[] Set the stitch at "_]" by turning the stitch selector..
[] Attach the buttonhole foot [B],.
[] Pull the buttonhole lever downward as far as it will go,.
_]Lower the needle into the garment where the buttonhole
isto start, and lower the foot,
[] Sew the front barrack and left row, then stop.
[] Click the buttonhole lever toward you
[] Sew the back bartack and right row, then stop the
machine at the starting point.
To cut the opening and to reset for sewing the next
buttonhole, refer to instructions [] and [] on
page 82_
f
l (
®
f
%%%
f
@%
®
J
J
.J
_ J
88
To Next Page
Loading...
