Cleaning the Shuttle Race and Feed Dogs
[] Unplugthemachineandremovethepresserfootand
needle°Openthefacecovertoallowroomtoremovethe
needleplatescrewwithascrewdriver,,Removetheneedle
plate(_andtakeoutthebobbin_
Needleplate
[] Liftupthebobbinholder(_)andremoveit.
(_ Bobbinholder
[] Brushoutdustandlint inside the bobbin holder. Clean
the feed dogs (_and hook race@with a lint brush. Wipe
out gently with a soft, dry cloth°
(_ Feed dogs
@ Hook race
[] Line up the triangle marks(_)and position the bobbin
holder, so that the notch fits next to the stopper(_in the
hook race
® Line up the triangle marks.
(_ The notch fits next to the stopper
Oiling the Machine
Unplug the machine_ Open the face cover and oil the two
points, as shown, at least once a year One or two drops of
oil is sufficient. Remove excess oil, otherwise it may stain the
fabric. In case the machine has not been used for a long
period, oi_it before sewing. Use quality sewing machine oil.
f
EJ
[]
[]
[]
f
®
®
too
To Next Page
Loading...
Need help?
General
