SECTION VII. BUTTONHOLE
Automatic Buttonhole
(_ Stitch selector:
(_ Stitch width:
® Stitch length:
@ Needle thread tension:
Presser foot R:
i] (BH)
3 to 6.5
0,25 to 1 0
2 to 6
Automatic buttonhole foot
° Preparation for sewing
L_ Groove
(_) Pin
Attach the automatic buttonhole foot Ro Make sure the
groove on the foot holder catches the pin on the foot when
lowering the presser foot.
. To sew
(_) Button holder
(2_ Buttonhole lever
The buttonhole size is automatically set by placing the
button in the rear of the automatic buttonhole foot,
The button holder on the foot takes a button up to t 0"
(2,5 cm) in diameter.,
Make a test buttonhole on an extra piece of the fabric to
check your settings.
Use interfacing on stretch fabrics,.
[] Pull the button holder(_to the back, and place the
button in it. Push it forward tightly against the button-
[] Pull the buttonhole lever(_)down as far as it wil! go.
f
[]
[]
d)
o...
J
............. J
8O
To Next Page
Loading...
Need help?
General
