EasyManua.ls Logo

Kenmore 385.16231 - Button Sewing; Overcasting

Kenmore 385.16231
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Monogramming
0 Stitch selector: 5
® Stitch width: 3
® Stitch Iength: 05 to 1
4@Needle thread tension: I to 4
@ Presser foot F: Satin stitch foot
L_ Pressure adjusting lever: 1 or 2
Attach a piece of stabilizer on the wrong side (Bottom side)
of the fabric,
Draw letters on the fabric with tailor's chaiko Form each
pattern with a satin stitch, adjusting the stitch width,
Q
4@
( } ®
® ®
Applique
(_) Stitch selector:
® Stitch width:
® Stitch length:
4@Needle thread tension:
Presser foot F:
(_) Pressure adjusting lever:
9
6,5
Gold stretch stitch position
2to 6
Satin stitch foot
2
Baste applique pieces on the fabric, or fuse the applique
pieces with an iron-on fabric joiner, Stitch around the
applique, making sure the needle falls along the raw edge
of the applique,,
NOTE:
Maximum stitch width for pattern #9 is ! .4" (3,5 mm)
when setting the stitch width control at 6.5°
4@ ® ®
J
54

Table of Contents

Related product manuals