Kodak ESP 3 User Manual

Chapter 3
14 Kodak ESP·3 All-in-One
Handling paper
Use the following guidelines when handling paper:
 To avoid fingerprints, handle paper by the edges as much as possible.
 Avoid touching the glossy side of the photo paper.
 Store paper flat, away from direct sunlight and out of high-temperature environments (such as
a vehicle parked in the sun).
Loading the paper tray
You can load the Kodak ESP 3 All-in-One printer with various types of paper ranging from 100 to
216 mm (4 to 8.5 inches) wide and from 127 to 356 mm (6 to 14 inches) long, up to size A4. The
tray capacity is 100 sheets of 75 gsm (20 lb) plain paper (clean stack of new paper). You can also
load labels and transparencies.
Note To avoid fingerprints, handle photo paper by the edges and avoid touching the glossy side of
the paper.
1 Pull the paper tray all the way out until the paper guide flips up on the right side.
2 Slide the paper width guide to its left-most position.
3 Align the edges of a stack of paper.
4 Insert the stack of paper into the paper tray with the short edge forward and the print side
down.

Kodak ESP 3 Specifications

General

Brand	Kodak
Model	ESP 3
Category	All in One Printer
Language	English