Kodak ESP 3 User Manual

Appendix
User guide 59
Safety
 Read and follow these cautions and warnings before using Kodak products.
 Always follow basic safety procedures.
 Follow all warnings and instructions marked on the Kodak ESP 3 All-in-One printer.
Parts
Caution Do not disassemble this product; there are no user-serviceable parts inside.
Refer servicing to Kodak qualified service personnel.
Warning Keep out of reach of children. Ink may be harmful if swallowed.
Power
Caution If the power lead or plug is frayed or damaged, the equipment gets wet or
the equipment does not operate normally when the operating instructions are
followed, unplug your printer from the power outlet and refer servicing to qualified
service personnel.
Caution The AC adaptor power supply is equipped with a three-wire earthing type
plug. If you cannot insert the plug into the power outlet, contact an electrician to
check or replace the power outlet.
Caution Do not plug the AC adaptor into a household extension lead.
Caution For added protection from damage during a lightning storm or any time
when your printer and its associated AC adaptor will be left unused for long periods
of time, unplug the AC adaptor from the power outlet.
Warning Pushing objects through the equipment openings can result in an electric
shock or risk of fire.
Warning The use of an accessory attachment that is not recommended by Kodak,
such as an AC adaptor, could cause fire, electric shock or injury.
Location:
Caution To prevent your printer from overheating do not block or cover the slots and
openings in the equipment, place it near a heat register or install it in a cabinet
without proper ventilation.
Caution Do not use your printer near water or spill liquid on it.
Warning Do not place your printer on an unstable trolley, stand, bracket or table.
Injury to persons and damage to the equipment may occur.

Kodak ESP 3 Specifications

General

Brand	Kodak
Model	ESP 3
Category	All in One Printer
Language	English