Kodak ESP 3 User Manual

Chapter 4
18 Kodak ESP·3 All-in-One
To transfer pictures from a USB storage device
1 On the front printer panel, insert a USB storage device into the USB port. The KODAK All-in-
One Printer software dialog opens on the PC monitor.
2 On the KODAK All-in-One Printer Software dialog, select Transfer my pictures and click OK.
3 On the Select Device dialog, select the device you want to use and click OK.
4 Complete the file transfer with Kodak EasyShare. If Kodak EasyShare is not installed, follow the
instructions in the Scanner and Camera Wizard to complete the transfer.
Transfer to a Macintosh computer
To transfer from a PictBridge camera
1 On the front printer panel, connect a PictBridge camera to the USB port.
2 When a transfer or connection message appears on your computer monitor, click Yes.
3 Complete the file transfer with Kodak EasyShare. If EasyShare is not installed on your computer,
use iPhoto or Image Capture to complete the transfer.
To transfer from a memory card
1 On the front printer panel, insert a memory card into one of the memory card slots.
2 Complete the file transfer with Kodak EasyShare. If EasyShare is not installed on your computer,
use iPhoto or Image Capture to complete the transfer.
To transfer from a USB storage device
1 On the front printer panel, insert a USB storage device into the USB port.
2 Complete the file transfer with Kodak EasyShare. If EasyShare is not installed on your computer,
use iPhoto or Image Capture to complete the transfer.
Printing from a Bluetooth device
The Kodak ESP 3 All-in-One printer allows you to print from a Bluetooth device. Bluetooth is a
short-range radio technology that allows wireless connectivity between electronic devices.
Bluetooth connectivity is supported using an optional Kodak USB Bluetooth adaptor that accepts
JPEG/EXIF image file types. You can purchase a Bluetooth adaptor directly from Kodak at
www.kodak.com/go/accessories.
To enable Bluetooth wireless connectivity, plug your Kodak Bluetooth adaptor into the front USB
port. When a Bluetooth device is connected and actively printing, no other functions are available.
You control printing from your Bluetooth device. Your Kodak ESP 3 All-in-One printer supports
connection to only one Bluetooth device at a time and has an 8-MB file size limitation.

Kodak ESP 3 Specifications

General

Brand	Kodak
Model	ESP 3
Category	All in One Printer
Language	English