Visit www.kodak.com/go/dfiswwcontacts.
Troubleshooting
Printer fails to power on
Probable cause
The power supply is not properly connected.
Corrective action
Make sure the power lead is connected to the power supply and plugged into an earthed power
outlet or power strip.
If you are using a power strip, make sure it is turned on.
If you are using a switched power outlet, make sure the switch is on.
Make sure the power outlet is supplying power.
If none of the above corrects the problem, contact Kodak support.
To Next Page
Loading...
Need help?
General
