TP-7070 7/1836 Section 2 Operation
2.10 Events
The controller displays status, alarm (warning), and fault
(shutdown) messages. See Figure 2-26 for a list of
possible alarms and faults.
Internal
Number
Description
Alarm
(Warning)
Fault
(Shutdown)
M3.10 Common fault X
M3.16 Common warning X
M3.17 GFCI tripped X
M3.18 Over frequency fault
(81H)
X
M3.19 Under frequency fault
(81l)
X
M3.20 Over voltage fault (59) X
M3.21 Under voltage fault (27) X
M3.22 Overload active power
warning (32PH)
X
M3.24 Reverse active power
fault (32RP)
X
M3.25 Overload reactive
power warning (32QH)
X
M3.26 Reverse reactive power
fault (32RQ)
X
M3.27 Over current fault (51) X
M3.29 Thermal overload fault X
M3.30 Low cranking voltage X
M3.31 Low controller
temperature
X
M3.42 Genset output greater
than 80% of rated
X
M3.43 Load shed 1 active X
M3.44 Load shed 2 active X
M3.45 Load shed 3 active X
M3.46 Load shed 4 active X
M3.63 Idle mode cancelled
before idle timeout
X
M3.66 Alternator winding
temperature warning
X
M3.67 Alternator winding
temperature fault
X
M3.68 Alternator bearing
temperature warning
X
M3.69 Alternator bearing
temperature fault
X
M3.76 Not in auto warning X
M3.77 Power plant out of
service fault
X
M3.80 Emergency push button
engaged fault
X
M3.107 Under speed fault X
M3.108 Over speed fault X
M3.109 Speed detection fault X
M3.113 Low engine coolant
level fault
X
M3.116 Engine coolant
temperature warning
X
Internal
Number
Description
Alarm
(Warning)
Fault
(Shutdown)
M3.117 Engine coolant
temperature fault
X
M3.124 Low coolant
temperature warning
X
M3.128 Low oil level warning X
M3.132 Lube (engine) oil
pressure warning
X
M3.133 Lube (engine) oil
pressure fault
X
M3.134 Lube (engine) oil
temperature warning
X
M3.135 Lube (engine) oil
temperature fault
X
M3.142 Speed detection first
starter warning
X
M3.143 Speed detection
second starter warning
X
M3.153 Low fuel level X
M3.154 Fuel level critically low X
M3.155 High fuel level X
M3.156 Fuel daily tank very
high level warning
X
M3.158 Fuel leak alarm X
M3.192 First starter warning X
M3.193 Overcrank X
M3.198 Battery charger fault X
M3.200 Low battery voltage X
M3.201 High battery voltage X
M3.212 APM internal battery
warning
X
M3.550 Engine CAN bus
communication fault
X
M3.553 Regulation module 1
communication fault
X
M3.567 APM802 watchdog X
M3.720 Analog sensor fault
input AI #0
X
M3.721 Analog sensor fault
input AI #1
X
M3.722 Analog sensor fault
input AI #2
X
Figure 2-26 Warning and Shutdown Messages