Kohler KD1750 User Manual

TP-7070 7/1842 Section 2 Operation
2.11 Applications
Touch the Applications button in the top bar to open the Applications screen. See Figure 2-38. From this screen, you
can access the screens listed in Figure 2-39. Note that access to some screens requires logging on as an operator.
1. Reference
2. Region settings
3. HMI settings
4. Restart
5. Display cleaning
6. Firmware update
7. Screenshot
8. Ladder tools
9. Save parameters
10. Upload parameters
11. Applications button
1 234
7
8
9
5
6
11
10
Figure 2-38 Applications Screen
Number Operator User
1 Reference:
Information on the administrative characteristics of the installation: name of the site, case
reference, software versions, etc.
X X
2 Region settings
Used to set the user language, the date, the time, the mechanical units used, insert a
customer--specific logo
X X
3 HMI settings:
Used to adjust the screen brightness in standby mode, and the calibration of the touch
panel
X X
4 Restart:
Used to reboot the HMI module
X
5 Display cleaning:
Used to lock the screen for 20 seconds to allow cleaning without adversely affecting
operation
X X
6
Firmware update:
Used for the software update for the HMI module
X
7 Screenshot:
Used to take a screenshot to capture the installation at a given moment
X X
8 Ladder tools:
Used to view additional equations
X
9 Save parameters:
Used to save the parameters of the application onto a USB key
X X
10 Upload parameters:
Used to load parameters from a USB key
X X
Figure 2-39 Screens Accessed from the Applications Screen

Kohler KD1750 Specifications

General

Brand	Kohler
Model	KD1750
Category	Inverter
Language	English