.
OPERATION
OPERATION
STOPPING THE MACHINE
WARNING
Avoid stopping suddenly. Give yourself ample room when stopping.
Even if the parking brake switch is turned ON, there is danger until the
parking brake pilot lamp lights up, so keep the brake pedal depressed.
NOTICE
Never use the parking brake switch to brake the machine when traveling except in an emergency. Apply the parking brake only
after the machine has stopped.
1.
Release accelerator pedal (1), then depress brake pedal (2) to
stop the machine.
2.
Place directional lever (3) in N (neutral) position.
3. Turn parking brake switch (4) to ON to apply the parking brake.
REMARK
When the parking brake is applied, the transmission is
automatically returned to neutral.
3 - 59
To Next Page
Loading...
Need help?
General
