Komatsu Avance WA500-3 User Manual

.
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
Item Unit WA500-3
Operating weight (including 1 operator: 80 kg (176 lb)) kg (lb) 28,220 (62215)
Normal load kg (lb) 8,100 (17860)
Bucket capacity (with tip tooth) m
3
(cu.yd) 4.3 (5.6)
Engine model – Komatsu SA6D140E-3 diesel engine
Flywheel horsepower kW(HP)/rpm 235 (316)/2,100
A Overall length (without tooth) mm (ft in) 9,055 (29' 8")
B Overall height mm (ft in) 3,815 (12' 6")
C Max. dimension when shanking bucket mm (ft in) 6,070 (19' 11")
D Overall width mm (ft in) 3,090 (10' 2")
E Min. ground clearance mm (ft in) 405 (1' 4")
F Bucket width (cutting edge width) mm (ft in) 3,400 (11' 2")
G Clearance
Tip of bucket mm (ft in) 3,290 (10' 10")
Tip of teeth mm (ft in) 3,025 (9' 11")
HReach
Tip of bucket mm (ft in) 1,320 (4' 4")
Tip of teeth mm (ft in) 1,490 (4' 11")
I Dump angle degrees 45
Min. turning radius
Outside of chassis mm (ft in) 7,390 (24' 3")
Center of outside tire mm (ft in) 6,160 (20' 3")
Travel speed
Forward
1st km/h (MPH) 6.7 (4.2)
2nd km/h (MPH) 12.0 (7.5)
3rd km/h (MPH) 20.2 (12.6)
4th km/h (MPH) 33.0 (20.5)
Reverse
1st km/h (MPH) 7.5 (4.7)
2nd km/h (MPH) 13.4 (8.3)
3rd km/h (MPH) 22.5 (14.0)
4th km/h (MPH) 36.1 (22.4)
5 - 2

Komatsu Avance WA500-3 Specifications

General

Brand	Komatsu
Model	Avance WA500-3
Category	Compact Loader
Language	English