.
MAINTENANCE
SERVICE PROCEDURE
CLEAN ELEMENT IN AIR CONDITIONER RECIRCULATION FILTER
1.
Open the filter inspection cover, remove the filter cover, then
remove the filter in the direction of the arrow.
When removing the filter to the side, put your weight on the
seat, and push down.
2.
Clean with compressed air in the same way as for the fresh air
filter.
If the filter is extremely dirty, rinse it in water.
After rinsing the filter, dry it completely before installing it again.
LUBRICATING
1.
Using a grease pump, pump in grease through the grease fittings marked by the arrows.
2.
After greasing, wipe off any old grease that was pushed out.
4 - 45
To Next Page
Loading...
Need help?
General
