Komatsu Avance WA500-3 User Manual

.
OPERATION
OPERATION
OPERATION OF WORK EQUIPMENT
Lift arm control lever (1) and bucket control lever (2) can be used
to operate the lift arm and bucket as follows.
LIFT ARM CONTROL LEVER
Position (a): RAISE
Position (b): HOLD
The lift arm is stopped and held in position.
Position (c): LOWER
Position (d): FLOAT
The lift arm moves freely under external force.
When the lift arm control lever is pulled further from the raise
position, the lever is stopped in this position until the lift arm
reaches the preset kick-out position, and the lever is return to the
hold position.
NOTICE
Do not use the FLOAT position when lowering the bucket. Use the FLOAT
position when leveling, see "LEVELING OPERATIONS (PAGE 3-66)".
3 - 61

Komatsu Avance WA500-3 Specifications

General

Brand	Komatsu
Model	Avance WA500-3
Category	Compact Loader
Language	English