12-hour system display
The clock is displayed in 12-hour mode with am or pm.
24-hour system display
The clock is displayed in 24-hour mode.
REMARK
If the battery is disconnected for a long period for storage etc., the time information may be lost.
For the method of setting and correcting the time and changing the display of the clock, see “CLOCK ADJUST-
MENT (3-91)”.
AFTERTREATMENT DEVICES REGENERATION PILOT LAMP
CAUTION
• Exhaust gas temperature may increase higher than the previous models during the aftertreatment
devices regeneration.
Stay away from the exhaust pipe outlet to prevent yourself from getting burnt.
Keep combustible materials away from the exhaust pipe outlet to prevent a fire.
• When there are thatched houses, dry leaves or pieces of paper near the job site, set the system to
the regeneration disable to prevent fire hazards due to highly heated exhaust gas during the after-
treatment devices regeneration.
The aftertreatment devices regeneration pilot lamp lights up
during regeneration of the exhaust gas aftertreatment devices.
It goes out when the regeneration is completed.
REMARK
The lighting cycle becomes shorter when the ambient tempera-
ture is lower or working load is smaller.
EXPLANATION OF COMPONENTS OPERATION
3-40
To Next Page
Loading...
Need help?
General
