AFTERTREATMENT DEVICES REGENERATION DISABLE PILOT LAMP
Aftertreatment devices regeneration disable pilot lamp lights up
when the aftertreatment devices are set not to be regenerated.
REMARK
Even if the aftertreatment devices regeneration is disabled,
when the manual stationary regeneration is necessary, KDPF
soot accumulation caution lamp lights up. If KDPF soot accu-
mulation caution lamp lights up, cancel the regeneration disa-
ble setting and perform manual stationary regeneration.
SECONDARY STEERING SYSTEM PILOT LAMP
(if equipped)
The secondary steering pilot lamp lights up while the secon-
dary steering is in operation.
If the engine stops or if the steering hydraulic circuit has a trou-
ble during travel, the secondary steering operates automatically
and the secondary steering pilot lamp lights up.
Move the machine to a safe place, stop the engine, and per-
form the inspection and maintenance.
REMARK
The secondary steering system does not operate while the ma-
chine is stopped.
SHIFT INDICATOR
This indicator shows the transmission shift range (speed
range).
SHIFT POSITION DISPLAY
The shift position display shows the position of the directional
lever or directional selector switch and the position of the gear
speed switch.
The selected position of the directional lever or directional se-
lector switch and the position of the gear speed switch are dis-
played in enlarged letters.
OPERATION EXPLANATION OF COMPONENTS
3-41
To Next Page
Loading...
Need help?
General
